View 933298950602_6779365.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lm139/239/239a/339/339a/lm2901/mc 3302 quad voltage comparator product specification 1995 nov 27 integrated circuits ic11 data handbook
philips semiconductors product specification lm139/239/239a/339/339a /lm2901/mc3302 quad voltage comparator 2 1995 nov 27 853-0930 16050 description the lm139 series consists of four independent precision voltage comparators, with an offset voltage specification as low as 2.0mv max for each comparator, which were designed specifically to operate from a single power supply over a wide range of voltages. operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. these comparators also have a unique characteristic in that the input commonmode voltage range includes ground, even though they are operated from a single power supply voltage. the lm139 series was designed to directly interface with ttl and cmos. when operated from both plus and minus power supplies, the lm139 series will directly interface with mos logic where their low power drain is a distinct advantage over standard comparators. features ? wide single supply voltage range 2.0v dc to 36v dc or dual supplies 1.0v dc to 18v dc ? very low supply current drain (0.8ma) independent of supply voltage (1.0mw/comparator at 5.0v dc ) ? low input biasing current 25na ? low input offset current 5na and offset voltage ? input commonmode voltage range includes ground ? differential input voltage range equal to the power supply voltage ? low output 250mv at 4ma saturation voltage ? output voltage compatible with ttl, dtl, ecl, mos and cmos logic systems applications ? a/d converters ? wide range vco ? mos clock generator ? high voltage logic gate ? multivibrators pin configuration 1 2 3 4 5 6 78 14 13 12 11 10 9 output 2 output 1 v+ input 1 input 1 + output 3 top view d, f, n packages input 1 input 1 + output 4 gnd input 4 input 3 + input 3 input 4 + 1 23 4 sl00070 figure 1. pin configuration equivalent circuit v + 100 m a 3.5 m a 3.5 m a 100 m a q1 q2 q3 q4 q8 q7 q6 q5 input output + input (1 comparator only) sl00071 figure 2. equivalent circuit ordering information description temperature range order code dwg # 14pin ceramic dual in-line package (cerdip) 55 to +125 c lm139f 0581b 14pin plastic dual in-line package (dip) 25 c to +85 c lm239an sot27-1 14pin plastic dual in-line package (dip) 25 c to +85 c lm239n sot27-1 14pin plastic small outline (so) package 25 c to +85 c lm239d sot108-1 14pin plastic dual in-line package (dip) 40 c to +125 c lm2901n sot27-1 14pin plastic small outline (so) package 40 c to +125 c lm2901d sot108-1 14pin plastic dual in-line package (dip) 0 to +70 c lm339an sot27-1 14pin plastic small outline (so) package 0 to +70 c lm339d sot108-1 14pin plastic dual in-line package (dip) 0 to +70 c lm339n sot27-1 14pin plastic small outline (so) package 40 c to +85 c mc3302d sot108-1 14pin ceramic dual in-line package (cerdip) 40 c to +85 c mc3302f 0581b 14pin plastic dual in-line package (dip) 40 c to +85 c mc3302n sot27-1 14pin plastic dual in-line package (dip) 55 to +125 c lm139n sot27-1
philips semiconductors product specification lm139/239/239a/339/339a/ lm2901/mc3302 quad voltage comparator 1995 nov 27 3 absolute maximum ratings symbol parameter rating unit v cc v cc supply voltage 36 or 18 v dc v diff differential input voltage 36 v dc v in input voltage 0.3 to +36 v dc p d maximum power dissipation, t a =25 c (stillair) 1 f package 1190 mw n package 1420 mw d package 1040 mw output shortcircuit to ground 2 continuous i in input current (v in <0.3v dc ) 3 50 ma t a operating temperature range lm139 55 to +125 c lm239/239a 25 to +85 c lm339/339a 0 to +70 c lm2901 40 to +125 c mc3302 40 to +85 c t stg storage temperature range 65 to +150 c t sold lead soldering temperature (10sec max) 300 c notes: 1. derate above 25 c, at the following rates: f package at 9.5mw/ c n package at 11.4mw/ c d package at 8.3mw/ c 2. short circuits from the output to v+ can cause excessive heating and eventual destruction. the maximum output current is appr oximately 20ma independent of the magnitude of v+. 3. this input current will only exist when the voltage at any of the input leads is driven negative. it is due to the collector base junction of the input pnp transistors becoming forward biased and thereby acting as input diode clamps. in addition to this diode action, there is also lateral npn parasitic transistor action on the ic chip. this transistor action can cause the output voltages of the comparators to go t o the v+ voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. this is not destructive and normal output states will reestablish when the input voltage, which was negative, again returns to a value greater than 0.3v dc .
philips semiconductors product specification lm139/239/239a/339/339a/ lm2901/mc3302 quad voltage comparator 1995 nov 27 4 dc and ac electrical characteristics v+=5v dc , lm139: 55 c t a 125 c; lm239/239a: 25 c t a 85 c; lm339/339a: 0 c t a 70 c;; lm2901: 40 c t a 125 c, mc3302: 40 c t a 85 c, unless otherwise specified. symbol parameter test conditions lm239a/339a unit symbol parameter test conditions min typ max unit v os input offset voltage 2 t a =25 c over temp. 1.0 2.0 4.0 mv mv v cm input commonmode voltage range 3 t a =25 c over temp. 0 0 v+1.5 v+2.0 v v idr differential input voltage 1 keep all v in s 0v dc (or v if need) v+ v i bias input bias current 4 i in(+) or i in() with output in linear range t a =25 c over temp. 25 250 400 na na i in(+) i in() i os input offset current t a =25 c 5.0 50 na over temp. 150 na i ol output sink current v in() 1v dc , v in (+)=0, v o 1.5v dc , t a =25 c 6.0 16 ma v in(+) 1v dc , v in ()=0 output leakage current v o =5v dc , t a =25 c 0.1 na v o =30v dc , over temp. 1.0 m a i cc supply current r l = on comparators, t a =25 c v+=30v 0.8 2.0 ma a v voltage gain r l 15k w , v+=15v dc 50 200 v/mv v ol saturation voltage v in() 1v dc , v in(+) =0, i sink 4ma t a =25 c over temp. 250 400 700 mv mv t lsr largesignal response time v in =ttl logic swing, v ref =1.4v dc , v rl =5v dc , r l =5.1k w , t a =25 c 300 ns t r response time 5 v rl =5v dc , r l =5.1k w , t a =25 c 1.3 m s see notes at the end of the electrical characteristics.
philips semiconductors product specification lm139/239/239a/339/339a/ lm2901/mc3302 quad voltage comparator 1995 nov 27 5 dc and ac electrical characteristics v+=5v dc , lm139: 55 c t a 125 c; lm239/239a: 25 c t a 85 c; lm339/339a: 0 c t a 70 c; lm2901: 40 c t a 125 c, mc3302: 40 c t a 85 c, unless otherwise specified. symbol parameter test conditions lm139 lm239/339 unit symbol parameter test conditions min typ max min typ max unit v os input offset voltage 2 t a =25 c over temp. 2.0 5.0 9.0 2.0 5.0 9.0 mv mv v cm input commonmode voltage range 3 t a =25 c over temp. 0 0 v+1.5 v+2.0 0 0 v+1.5 v+2.0 v v idr differential input voltage 1 keep all v in s 0v dc (or v if need) v+ v+ v i bias input bias current 4 i in(+) or i in() with output in linear range t a =25 c over temp. 25 100 300 25 250 400 na na i in(+) i in() i os input offset current t a =25 c 3.0 25 5.0 50 na over temp. 100 150 na i ol output sink current v in() 1v dc , v in (+)=0, v o 1.5v dc , t a =25 c 6.0 16 6.0 16 ma v in(+) 1v dc , v in ()=0 v o =5v dc , output leakage current t a =25 c 0.1 0.1 na v o =30v dc , over temp. 1.0 1.0 m a i cc supply current r l = on comparators, t a =25 c v+=30v 0.8 2.0 0.8 2.0 ma a v voltage gain r l 15k w , v+=15v dc 50 200 50 200 v/mv v ol saturation voltage v in() 1v dc , v in(+) =0, i sink 4ma t a =25 c over temp. 250 400 700 250 400 700 mv mv t lsr largesignal response time v in =ttl logic swing, v ref =1.4v dc , v rl =5v dc , r l =5.1k w , t a =25 c 300 300 ns t r response time 5 v rl =5v dc , r l =5.1k w , t a =25 c 1.3 1.3 m s see notes on following page.
philips semiconductors product specification lm139/239/239a/339/339a/ lm2901/mc3302 quad voltage comparator 1995 nov 27 6 dc and ac electrical characteristics v+=5v dc , lm139: 55 c t a 125 c; lm239/239a: 25 c t a 85 c; lm339/339a: 0 c t a 70 c; lm2901: 40 c t a 125 c, mc3302: 40 c t a 85 c, unless otherwise specified. symbol parameter test conditions lm2901 mc3302 unit symbol parameter test conditions min typ max min typ max unit v os input offset voltage 2 t a =25 c over temp. 2.0 9 7.0 15 3.0 20 40 mv mv v cm input commonmode voltage range 3 t a =25 c over temp. 0 0 v+1.5 v+2.0 0 0 v+1.5 v+2.0 v v idr differential input voltage 1 keep all v in s 0v dc (or v if need) v+ v+ v i bias input bias current 4 i in(+) or i in() with output in linear range t a =25 c over temp. 25 200 250 500 25 500 1000 na na i in(+) i in() i os input offset current t a =25 c 5 50 5 100 na over temp. 50 200 300 na i ol output sink current v in() 1v dc , v in (+)=0, v o 1.5v dc , t a =25 c 6.0 16 6 16 ma v in(+) 1v dc , v in ()=0 v o =5v dc , output leakage current t a =25 c 0.1 0.1 na v o =30v dc , over temp. 1.0 1.0 m a r l = on all comparators, .8 1.8 ma i cc supply current t a =25 c 0.8 2.0 r l = on all comparators, v+=30v 1.0 2.5 ma a v voltage gain r l 15k w , v+=15v dc 25 100 2 100 v/mv v ol saturation voltage v in() 1v dc , v in(+) =0, i sink 4ma t a =25 c over temp. 400 400 700 150 400 700 mv mv t lsr largesignal response time v in =ttl logic swing, v ref =1.4v dc , v rl =5v dc , r l =5.1k w , t a =25 c 300 300 ns t r response time 5 v rl =5v dc , r l =5.1k w , t a =25 c 1.3 1.3 m s notes: 1. positive excursions of input voltage may exceed the power supply level by 17v. as long as the other voltage remains within th e common-mode range, the comparator will provide a proper output state. the low input voltage state must not be less than 0.3v dc (or 0.3v dc below the magnitude of the negative power supply, if used). 2. at output switch point, v o 1.4v dc , r s =0 w with v+ from 5v dc to 30v dc ; and over the full input commonmode range (0v dc to v+ 1.5v dc ). inputs of unused comparators should be grounded. 3. the input commonmode voltage or either input signal voltage should not be allowed to go negative by more than 0.3v. the uppe r end of the commonmode voltage range is v+ 1.5v, but either or both inputs can go to 30v dc without damage. 4. the direction of the input current is out of the ic due to the pnp input stage. this current is essentially constant, indepen dent of the state of the output so no loading change exists on the reference or input lines. 5. the response time specified is for a 100mv input step with a 5mv overdrive. for larger overdrive signals, 300ns can be obtain ed (see typical performance characteristics section).
philips semiconductors product specification lm139/239/239a/339/339a/ lm2901/mc3302 quad voltage comparator 1995 nov 27 7 equivalent circuit 100k w 500pf 10 0.1 m f 20k w 50k w 20k w v + /2 v + 30k w 5.1k w 700k w v /2 + + vc frequency control voltage input 3.0k w output 1 output 2 + + + v ref hi + v in 2r s r s 2r s + v (12v dc ) 10k w lamp 2n2222 + + + + 5v dc 360 100 100k + + 5v dc 360 100 100k + + 5v dc 360 100 100k + + 5v dc 360 100 100k + v ref 4 + v ref 3 + v ref 2 + v ref 1 v o + v + 2.0k w v + o v o 1 100khz crystal 200k w 200k w 100k w 0.1 m f crystalcontrolled oscillator limit comparator twodecade highfrequency vco visible voltage indicator + ttltomos logic converter notes: v+ = 30v dc + 250m v dc < v c = 50v dc 700h < f o = 100khz note: input of unused comparators should be grounded. 1/4lm339 1/4lm339 1/4lm339 + v ref lo 5v dc 12v dc 0.01 m f v + + v ref (1.4v dc ) 10k w 1/4lm339 v o 12v o sl00072 figure 3. equivalent circuit
philips semiconductors product specification lm139/239/239a/339/339a/ lm2901/mc3302 quad voltage comparator 1995 nov 27 8 typical performance characteristics input voltage v e mv in output voltage v e mv o v out v in + + 5v 1.0 0.8 0.6 0.4 0.2 010 203040 v+ e supply voltage e v dc i + e supply current e ma t a -55 o c t a = 0 o c t a = +25 o c t a = 125 o c t a = +70 o c r l = 80 60 40 20 010203040 v + e supply voltage e v dc i e input current e na ndc t a = 55 o c t a = 0 o c t a = +70 o c t a = +25 o c t a = +125 o c v in (cm) = 0 v dc r in (cm) = 10k w out of saturation t a = + 125 o c t a = 55 o c t a + 25 o 10 1.0 0.1 0.01 0.001 0.01 0.1 1.0 10 100 i o e output sink current (ma) v e saturation voltage (v ) odc 6 5 4 3 2 1 0 0 50 100 0 0.5 1.0 1.5 2.0 time e m sec input voltage v e mv in output voltage v e mv o 5mv = input overdrive 100mv overdrive t a = 25 o c 5.1k v out v in 20mv + + 5v input overdrive = 100mv 20mv 5mv overdrive 6 5 4 3 2 1 0 0 50 100 0 0.5 1.0 1.5 2.0 time e m sec t a = 25 o c 5.1k supply current input current output saturation voltage response time for various input overdrives e negative transition response time for various input overdrives e positive transition sl00073 figure 4. typical performance characteristics
philips semiconductors product specification lm139/239/239a/339/339a/ lm2901/mc3302 quad voltage comparator philips semiconductors and philips electronics north america corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performanc e. philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under a ny patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copy right, or mask work right infringement, unless otherwise specified. applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. life support applications philips semiconductors and philips electronics north america corporation products are not designed for use in life support appl iances, devices, or systems where malfunction of a philips semiconductors and philips electronics north america corporation product can reasonab ly be expected to result in a personal injury. philips semiconductors and philips electronics north america corporation customers using or sel ling philips semiconductors and philips electronics north america corporation products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors and philips electronics north america corporation for any damages resulting from such improper use or sale. this data sheet contains preliminary data, and supplementary data will be published at a later date. philips semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. philips semiconductors 811 east arques avenue p.o. box 3409 sunnyvale, california 940883409 telephone 800-234-7381 definitions data sheet identification product status definition objective specification preliminary specification product specification formative or in design preproduction product full production this data sheet contains the design target or goal specifications for product development. specifications may change in any manner without notice. this data sheet contains final specifications. philips semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. philips semiconductors and philips electronics north america corporation register eligible circuits under the semiconductor chip protection act. ? copyright philips electronics north america corporation 1995 all rights reserved. printed in u.s.a.
philips semiconductors, inc. a subsidiary of philips electronics north america corporation engineer change notice 850-0007 form a 02/95 prepared by: page of last name init dept ext bin# date plant permanent immediate temporary after-hours ecn number & date approval date: expiration date: master signoff: yes: no: initials: ecn continuation attached: yes: no: router date : product group: part number pkg/rev basic die/rev customer part #/rev alpha document title: document type: document number: rev: description of change: include from/to info where appropriate effect: ( )major ( )minor provide cpcn status, justification for the change and an explanation of effect oids/documents affected: prime cddb dddb fab xref pdym esort emcr pmf/pddb fpoid apl ft/pa ft flow mpo probe diagram bonding diagram schematic table other key sponsor: co-sponsors: dept# signature date ext/user id ecn distribution: dept# dept# dept# miscellaneous distribution: dept# dept# dept# material disposition: use as is rework scrap fab esort ds assy seal symb m/v ft pa pack fg strs other matl dresser w 9226 4645 60 svl x communication products group data sheet 853- x 853- nov 27, 1995 see description below all data sheets reflect change from 85 c to 125 c. lm2901 853-0930 13721 94 aug 31 . . . . . . . . . . . lm2902 853-0929 13721 94 aug 31 . . . . . . . . . . . lm2903 853-0932 13721 94 aug 31 . . . . . . . . . . . lm2904 853-1241 13721 94 aug 31 . . . . . . . . . . .
go to philips semiconductors' home page select & go... start part catalog & datasheets catalog by function discrete semiconductors audio clocks and watches data communications microcontrollers peripherals standard analog video wired communications wireless communications catalog by system automotive consumer multimedia systems communications pc/pc-peripherals cross reference models packages application notes selection guides other technical documentation end of life information datahandbook system relevant links about catalog tree about search about this site subscribe to enews catalog & datasheets search lm139, 239, 239a, 339, 339a, lm2901, mc 3302 lm139, 239, 239a, 339, 339a, lm2901, mc 3302 information as of 2000 - 08 - 23 lm139, 239, 239a, 339, 339a, lm2901, mc 3302; quad voltage comparator the lm139 series consists of four independent precision voltage comparators, with an offset voltage specification as low as 2.0mv max for each comparator, which were designed specifically to operate from a single power supply over a wide range of voltages. operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. these comparators also have a unique characteristic in that the input common - mode voltage range includes ground, even though they are operated from a single power supply voltage. the lm139 series was designed to directly interface with ttl and cmos. when operated from both plus and minus power supplies, the lm139 series will directly interface with mos logic where their low power drain is a distinct advantage over standard comparators. l wide single supply voltage range 2.0v dc to 36v dc or dual supplies 1.0v dc to 18v dc l very low supply current drain (0.8ma) independent of supply voltage (1.0mw/comparator at 5.0v dc ) l low input biasing current 25na l low input offset current 5na and offset voltage l input common - mode voltage range includes ground l differential input voltage range equal to the power supply voltage l low output 250mv at 4ma saturation voltage l output voltage compatible with ttl, dtl, ecl, mos and cmos logic systems ? description ? features ? applications ? datasheet ? products, packages, availability and ordering ? find similar products ? to be kept informed on lm139, 239, 239a, 339, 339a, lm2901, mc 3302, subscribe to enews. subscribe to enews description features applications
l a/d converters l wide range vco l mos clock generator l high voltage logic gate l multivibrators datasheet type nr. title publication release date datasheet status page count file size (kb) datasheet lm139, 239, 239a, 339, 339a, lm2901, mc 3302 quad voltage comparator 27-nov-95 product specification 10 75 download products, packages, availability and ordering partnumber north american partnumber order code (12nc) marking/packing package device status buy online lm139n lm139n 9332 909 50602 standard marking * tube (signetics) sot27 full production lm239an lm239an 9339 578 50602 standard marking * tube (signetics) sot27 full production lm239d lm239d 9339 765 70602 standard marking * tube (signetics) sot108 full production lm239d-t 9339 765 70623 standard marking * reel pack, smd, 13" (signetics) sot108 full production lm239n lm239n 9332 977 30602 standard marking * tube (signetics) sot27 full production lm2901d lm2901d 9337 871 20602 standard marking * tube (signetics) sot108 full production lm2901d-t 9337 871 20623 standard marking * reel pack, smd, 13" (signetics) sot108 full production lm2901n lm2901n 9334 635 30602 standard marking * tube (signetics) sot27 full production lm339ad lm339ad 9334 342 70112 standard marking * bulk pack sot108 full production lm339ad-t 9334 342 70118 standard marking * reel pack, smd, 13" sot108 full production lm339an lm339an 9333 485 60602 standard marking * tube (signetics) sot27 full production lm339d lm339d 9336 559 60602 standard marking * tube (signetics) sot108 full production lm339d-t 9336 559 60623 standard marking * reel pack, smd, 13" (signetics) sot108 full production lm339n lm339n 9333 511 30602 standard marking * tube (signetics) sot27 full production mc3302d mc3302d 9337 382 80602 standard marking * tube (signetics) sot108 full production mc3302d-t 9337 382 80623 standard marking * reel pack, smd, 13" (signetics) sot108 full production
please read information about some discontinued variants of this product . lm139, 239, 239a, 339, 339a, lm2901, mc 3302 links to the similar products page containing an overview of products that are similar in function or related to the part number(s) as listed on this page. the similar products page includes products from the same catalog tree(s) , relevant selection guides and products from the same functional category. mc3302d-t 9337 382 80623 13" (signetics) sot108 full production mc3302n mc3302n 9332 989 50602 standard marking * tube (signetics) sot27 full production find similar products: copyright ? 2000 royal philips electronics all rights reserved. terms and conditions .

▲Up To Search▲

Price & Availability of 933298950602

	To Download 933298950602 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .